ZDAN-D410/12x30
The final price for the ZDAN-D410/12x30 embedded part depends on the quantity and availability of the manufactured product. Submit a request on our website, and our managers will contact you shortly to clarify the information.
The ZDAN-D410/12x30 anchor insert for faceted load-bearing supports. The studs are connected by a jig with pre-drilled holes for the studs.
Embedded part designations:
- ЗД - embedded part;
- A - anchor
- D - location of fastening elements on the diameter;
- H – possible length of embedded parts of the support foundation (see technical specifications);
- 410 – the center-to-center dimension of the side of the conductor on which the fastening elements are located, in mm;
- 12 – number of fasteners;
- 30 – diameter of the fastening element, in mm;
Installation ZDAN-D410/12x30
The type, dimensions and bearing capacity of the embedded part are selected in accordance with the calculation in each specific case and depend on the following parameters: type, size, purpose of the support, operating conditions and region, wind load, freezing depth, and soil composition.
It is installed in the pre-prepared soil of a pit (drilled well). After the conductor is installed and secured with nuts, the underground portion of the embedded part, connected to the foundation block reinforcement, is poured with concrete. The threaded portions of the embedded part's studs remain above the foundation surface. The support flange is secured to the threaded portions of the studs using nuts.
The equipment is installed in accordance with the product passport or installation instructions.
| Type of mortgage | anchor |
| Conductor's uniform | round |
| Center-to-center size | 410 mm |
| Diameter of the fastener | 30 mm |
| Length of embedded parts (H) | 0.7;0.9;1.1;1.3 |
| Number of bolts | 12 |
Опоры освещения «АГРИСОВГАЗ» 
