KGT1-NxV-Ts
The final price of the KGT1-NxV-Ts bracket depends on the quantity and availability of manufactured products. Submit a request on our website, and our managers will contact you shortly to clarify the information.
KGT1-NxV-Ts radius bracket for faceted and conical round supports.
Bracket designations:
- K - bracket;
- G - for installation on a faceted and conical round support.;
- T - T-shaped
- 69 - diameter of the top of the support;
- 1 - number of lighting fixtures on the bracket;
- H – height in meters (see technical specifications);
- B - reach in meters (see technical specifications);
- C - coating applied by hot-dip galvanizing.
Bracket KGT1-NxV-C
A bracket allows you to direct light at a specific angle and provide the desired intensity. There are many types of mounts available to meet these needs.
A T-shaped bracket is designed for mounting floodlights that illuminate large open areas. The T-shaped bracket consists of a crossbar made of square or channel steel of a specific length, depending on the number and dimensions of the floodlights. The bracket is welded to a pipe, which is then used to mount it to the support.
Bracket for installation on a faceted or round conical support.
For a bracket designed for installation on non-load-bearing supports with a standard top diameter of 69 mm, the shaft diameter is not specified in the designation. Standard top diameters in the structural marking diagram for load-bearing faceted supports are: 90, 120, 180, and 250 mm. The crossbar length is determined by the dimensions and number of floodlights planned for installation on the bracket.
| Number of lighting fixtures | 1 |
| Bracket type | radius |
| Height (H) |
0.2; 0.5; 1.0 m |
| Departure (B) | 0.5; 1.0; 1.5; 1.8; 2.0; 2.5 m |
| Coating |
hot-dip galvanizing |
Опоры освещения «АГРИСОВГАЗ» 
