NPG-10/12-02-C
The final price of the NPG-10/12-02-Ts support depends on the quantity and availability of manufactured products. Submit a request on our website, and our managers will contact you shortly to clarify the information.
The NPG-10/12-02-Ts is a non-load-bearing, upright, canonical, faceted, standard support. Allows the use of brackets for four console lighting fixtures, as per GOST 9.307-2021.
Support designations:
- NPG - non-power straight-post faceted;
- 10/12 - height of support above ground in meters/total height of support;
- 02 - internal supply with maintenance through a side hatch in the lower part of the support;
- C - the coating is applied by hot-dip galvanizing;
The service life of a support with a zinc layer from 40 to 160 microns is at least 30 years.
Installation of support NPG-10/12-02-C
The support is installed directly into reinforced concrete foundations. The underground height is determined individually. Foundation characteristics are determined based on three factors: the climatic conditions of the operating area, soil parameters, and geological surveys.
Lighting brackets with no more than four consoles are mounted on the pole. Heights range from 3 to 16.5 meters in 0.5-meter increments.
| Support type | non-forceful |
| Installation method |
upright |
| Weight | 139 kg |
| Height above ground | 10 m |
| Total height | 12 m |
| Height of the underground part | 2 m |
| Diameter of the inner top of the barrel | 61 mm |
| Diameter of the outer top of the barrel | 69 mm |
| Cable connection option | interior |
| Type of coating | hot-dip galvanizing |
Опоры освещения «АГРИСОВГАЗ» 
