SP-1800-10/13-01-C

The SP-1800-10/13-01-C is a straight, cylindrical, round support. It allows the use of brackets for four console lighting fixtures, as per GOST 9.307-2021.

Support designations:

• SP - power straight-rack;
• 1800 - permissible lateral static load at the top point of the barrel;
• 10/13 - support height/total height;
• 01 - air supply to the upper part of the support;
• C - the coating is applied by hot-dip galvanizing;

The supports are protected from corrosion by hot-dip galvanizing (GOST 9.307-2021). With a zinc coating of 40 to 160 microns, the support has a service life of at least 30 years.

Support SP-1800-10/13-01-C

The support is designed for suspending overhead power lines with self-supporting insulated 0.4 kV conductors. The upper section is equipped with brackets for mounting lighting fixtures.

The pipe support is made of two or more welded pipe sections and protected from corrosion by hot-dip galvanizing in accordance with GOST 9.307-2021.

The lower part of the support is an embedded part of the foundation and is installed directly into the concrete base. Since load-bearing supports lack hatches, wiring is introduced through an opening in the upper part of the structure. At the customer's request, the bottom of the support can be equipped with a hatch with a protective cover.

The top of the support has a special opening for attaching a special bracket for mounting the self-supporting insulated wire (SIW) line. Electrical wires are fed through the openings to power lighting fixtures.